Method Race Wheels has announced the addition of the 600 Series to their lineup for 2018. The 600 Series blends Method’s clean and simple styling with the oversize, more aggressive applications so popular in the lifted truck and Jeep market today.
Leading off the 600 Series is the MR605 NV. As the name hints, this wheel is an evolution of the popular MR305 NV with more aggressive dimensions including 20x10 and 20x12. Method’s signature ‘Street-Loc’ lip is standard on the one-piece wheel and includes removable stainless steel bolts around the lip. For those who are after a deep-dish look, this is going to be a contender. The 20x10 has a 3” lip and the 20x12 has a 5.25” lip. A bolt-on aluminum center ring houses a snap in cap with a raised Method logo for 5 & 6 lug applications with a bolt-on cap for 8 lug. Around the bolt circle are two massive debossed Method logos. Finishes for the MR605 include Bronze and Matte Black. With stout load ratings of 2650 lbs. for 5 & 6 lug applications and 3640 lbs. for 8 lug, these wheels will be right at home on lifted trucks, Jeeps and SUVs.
The second offering in the 600 Series is the MR606 Mesh. Staying true to the 600 Series philosophy, the MR606 takes the ultra clean styling of the MR306 Mesh wheel and exaggerates it. This wheel is going to be another contender for the deep dish club boasting a 3” lip on the 20x10s and 5” lip on the 20x12s. Cleaning things up a bit around the outside, the MR606 features a more conventional non-beadlock lip design while still including removable stainless steel bolts. Center cap duties are taken care of via a bolt-on aluminum center ring with a snap in cap with raised Method logo for 5 & 6 lug, while a bolt on piece will cover 8 lug applications. To hammer it home, a second Method logo is subtly debossed into one of the spokes. The MR606 will be available in Titanium and Matte Black finishes. Don’t mistake the clean and simple design for weakness, the MR606 features the same 2650 lb. load rating for 5 & 6 lug applications and 3640 lbs. for 8 lug.
The third wheel in the 600 Series is the MR610 Con6. Just like its predecessor the MR310, the MR610 takes the concave look and turns it to 11. Virtually no lip on a 20x10 with -24mm offset (4.55” BS) and a 20x12 with -52mm (4.5” BS) means you’re getting a super deep concave that will make quite a visual statement once mounted on lifted vehicles. A bolt on aluminum center cap with snap in cap will come with 5 & 6 lug applications while a separate bolt on piece will cover 8 lug. Branding on the MR610 is kept to a minimum with a clean Method debossed logo in one of the six spokes. Making your way out, the MR610 features the new v.2 Street-Loc lip with removable stainless steel bolts all around. Finishes for the MR610 include Bronze with Matte Black lip and Matte Black.
Arriving Early December 2017 - Preorder Today